Accommodations
Under construction:
Fore cabin with double bed.
Single cabin with 2 single beds.
Owner’s Cabin WC / shower and bath.
Saloon, steering house
Two toilets.
Galley
Under construction
Electronics
Echosounder GPS Chart Plotter Garmin GPSMAP® 178C
Electrical
Only Brand new 10 Kamp Generator installed
Deck
2 self-tailing winches installed only.
Naval steel ASTM A-131-A Thickness 3/16”
Sail and Rigging
No sails not rigging yet. (Boat under construction)
Additional Specs
LOA(Length Over All) 46'-10'' 14,28 m
LWL(load waterline length) 42'-0'' 12,80 m
Beam 13'- 01'' 3,99 m
BWL(beam waterline) 12' - 07'' 3,85 m
Draft 13'-1'' 1,80 m
Disp. Displacement or weight of the boat 40.000 lbs 18.143 kg
Ballast (Weight of the bilge or keel) 12.000 lbs 5.443 kg
Sail Area 1.200 square feet 111 Sq.mt.
Auxiliary Power 60 - 85 HP
Displacement length Ratio 235
Sail Area Displ. Ratio 16.5
Diesel Oil 303 US gall. 1.150 liters
Fresh Water 224 US gall 850 liters
Ballast ratio 30%
AWP(waterplane area) 354 sq.feet 33 sq.m
AVS (angle of vanishing stability) 123,6 degrees
Features and Benefits
1- WHY I AM SELLING MY UNFINISHED BOAT?
I started to build my boat in 2003. I am working on the Offshore Oil industry in Brazil. I work 6 weeks on 6 weeks off. I am living in Brazil. I am building my boat in Columbia. Therefore, I am traveling from Brazil to Columbia every 1 1/2 month to carry out my project. I have already started another vessel at my home in Brazil. It is a 38’ sailing vessel.
2- The boat’s hull condition is excellent. She is well painted and protected.
The boat has not been launched into the water. I have been working constantly on the project.
3- My plan was to build my boat to live onboard with my family. I have been very concerned with the use of good quality materials during all stages of the construction. Thinking first in my safety and my family integrity once the boat will be at sea.
4- The buyer will have a brand new 2008 46' sailing boat and will spend less money than buying a similar already done vessel.
5- I am estimating to spend approximately USD$60,000 to finish it and make ready to sail (Budget estimated here in Columbia)
6- I will be very glad to help and assist the buyer to continue the project.
7- Also, I am interested in a partner for my project. I mean fifty- fifty in the sailboat value.
Builder: Custom
Dimensions
LOA: 46' LWL: 42' Beam: 3.99m
Displacement: 40000 Draft: 1.8m Ballast: 12000
Engines
Engine(s): Deutz Engine(s) HP: 105 Engine Model: TD226B-4C2
Cruising Speed: 9
Tankage
Fuel: 303 Water: 224
http://www.eglobalyachts.com »
|
|
|
